Intake Manifold?
#1
Intake Manifold?
Does anyone have an intake manifold? Maybe like this
http://www.americanmuscle.com/ford-r...-manifold.html
Also with a TB? Anyone have this setup? Hows installation and what about the gains? And do these work with any intake, I have a Steeda. Thanks.
http://www.americanmuscle.com/ford-r...-manifold.html
Also with a TB? Anyone have this setup? Hows installation and what about the gains? And do these work with any intake, I have a Steeda. Thanks.
#2
I curious as well. From what I hear the installation is pretty straight forward. In some reviews on AM.com there were people complaining about it flexing but Ford says it is normal and to be expected. Hopefully someone thats tried it can swoop in here because if its worth it I'm considering doing it when I get cams in the future.
#4
Don't know the exact gains but save the money ($94.99 to be exact) from getting the FRPP manifold and the Steeda Charge Motion Delete Plates and get this manifold:
http://www.americanmuscle.com/cnl-manifold-0509gt.html
It has longer intake runners that replace the charge motion (or delete) plates. It's also aluminum and will not flex at all.
Also, if you were ever to go with forced induction that does not replace the manifold, this will give you a larger opening for a mono-blade throttle-body.
http://www.americanmuscle.com/cnl-manifold-0509gt.html
It has longer intake runners that replace the charge motion (or delete) plates. It's also aluminum and will not flex at all.
Also, if you were ever to go with forced induction that does not replace the manifold, this will give you a larger opening for a mono-blade throttle-body.
#5
Aren't delete plates only available for 05-08? Would the C&L still be a better alternative for the 09-10(OP and I are in this category) then the frpp intake for N/A applications even though we can't do delete plates or would it be better for both N/A and S/C regardless? Sorry I don't mean to hyjack the thread but.. well it seems I already have..
Last edited by BlackGT45th; 12-03-2011 at 10:13 PM.
#6
The c&l would be better for forced induction, again, especially if you get a larger mono blade throttle body. As for the plate delete, I havent looked at an 08+ engine. Do they just have blank plates in there or does the manifold sit lower or is it different in some way than an 05? My guess would be there it just has blank plates from the factory.
#7
After a search, Ford molded the plates into the factory intake manifold for 09-10. So by changing the intake manifold we will essentially get "free" delete plates and if a C&L manifold is a better option with delete plates then the frpp intake is with the delete plates on an 05-08 I suppose the few extra bucks for the C&L is well worth it if the gains are a bit higher. Thanks JCON for the C&L info, I think I know what I'll be doing now.
Last edited by BlackGT45th; 12-04-2011 at 12:24 AM.
#8
Im also trying not to void warranty..my parents bought me the car and are very strict. So i have to be able to return to stock somewhat easy. The c&l could pose a problem there, although i do like the information you've said..
#9
From what I've read on the forums the dealer can't deny warranty coverage unless the problem can be directly attributed to an aftermarket part, and I also read that if the dealer does the install and something goes wrong the dealer is required to honor the warranty don't know if it applies to just Ford or frpp equipment though. Not 100% sure about the dealer install part but I know they have to prove the aftermarket part caused the problem to void warranty.
#10
The opening on the c&l is much larger than the FRPP and would match up well with this throttlebody: http://www.whipplesuperchargers.com/...sp?ProdID=1237
I would imagine excellent gains based on their 30-60hp for GT's and 100hp for the GT500. Opening up the actual inlet will get more flow.
I would imagine excellent gains based on their 30-60hp for GT's and 100hp for the GT500. Opening up the actual inlet will get more flow.