Help with Steeda UD Pulley Install!!!
#1
Help with Steeda UD Pulley Install!!!
I have a 2006 Mustang GT and am installing the Steeda underdrive pulleys. I removed the stock crankshaft pulley and am not sure if I have the correct Steeda pulley. The stock pulley had a recess for the large washer to sit in but the steeda pulley has no recess. I am confused as to why there is no recess and am wondering if Steeda sent me the wrong part. I am afraid that without the recess, the washer will not stay centered on the crankshaft pulley. Please help me ASAP because I need my car up and running by tomorrow! Thank you!
#2
I have attached some pictures so you can see the difference between the stock pulley with the recess and the Steeda pulley without it. There is also a picture of the washer that was used to hold the stock pulley in place.
http://s1082.beta.photobucket.com/us...lley%20Install
http://s1082.beta.photobucket.com/us...lley%20Install
#3
I just looked at the Steeda UDP's i used to have on my car before I went F/I. My Steeda crank pulley did not have a recess, in fact it was the opposite and had a raised ridge around the hole that the washer rode on. Yours must be a new version or something. The bolt will actually keep the washer centered anyway.
You did get a new bolt, right? They are alleged to not be reusable.
You did get a new bolt, right? They are alleged to not be reusable.
#5
I just looked at the Steeda UDP's i used to have on my car before I went F/I. My Steeda crank pulley did not have a recess, in fact it was the opposite and had a raised ridge around the hole that the washer rode on. Yours must be a new version or something. The bolt will actually keep the washer centered anyway.
You did get a new bolt, right? They are alleged to not be reusable.
You did get a new bolt, right? They are alleged to not be reusable.
#6
yes, part number is F5RZ-6A340-B
Here is the link to the whole write up by tacobill
how to install Steeda UDP's
Here is the link to the whole write up by tacobill
how to install Steeda UDP's
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-08-2015 11:50 AM
tj@steeda
Steeda Autosports
0
09-02-2015 08:40 PM