jlogan666

So I bought a Bama Tuner for my 07 gt and the only other mod I have is a Steeda CAI... So my question is this:

When I use the custom tunes off of the tuner, I always get an engine code "Too Lean (Bank 2)" ... Now, I have messed with the a/f ratio going from 0-12 and I still receive the code... Has anyone else received this problem? Any solutions?

Thx

JCON

Bad tune most likely, call BAMA or use the canned tune for that intake.

jlogan666

It couldn't be anything else? I'll give bama a call tomorrow. thx

JCON

Have you tried returning to stock then reloading the tune?

jlogan666

hmm.. No I haven't. I will try that before I call bama. Thanks

AMDanBailer

Jlogan,

I wouldn't recommend messing with any of the settings, especially not the Air/Fuel Ratios. That's the beauty of Free tunes for life, we can always get a revised file sent out very quickly.

We send out thousands of tunes and build them all from the ground up for your PCM code and your mods. They're not just "canned" tunes, they're built custom by our team, so every once in a while it's possible we mess one up! We'll definitely get it straightened out for you, though! Give one of our Bama Tuning Specialists a call and they'll work with you to figure out exactly what's going on.

Our Bama Performance tuning specialists are here in the building Monday-Friday from 9AM-5:30PM EST and Saturday 9AM-5:30PM EST

I hope this helps! Let me know if you have any questions or need some assistance.

-Dan

jlogan666

I called Bama and they re-sent me tunes and it seems like it is running well. I will know more tomorrow... thanks for the help.

AMDanBailer

Sounds good! I'm glad the Bama team was able to get your situation handled quickly, let me know if you need any further assistance.

-Dan

Nuke

The Steeda CAI REQUIRES a tune so if you were running the CAI with the stock tune then you can bet that you'd throw a lean code.

Hope the new tune works out.