Best CAI
04-30-2013, 06:57 PM
#1
Thread Starter
Join Date: Apr 2013
Location: ON
Posts: 14
Best CAI
Let me preface this by saying I did search but couldnt find a definite answer.
Im about to buy an intake/tuner combo and looking at Steeda, JLT, Airraid and BBK. Obviously most of your power gains come from the tune, but is there a real difference between the intakes? Or just personal preference?
Im about to buy an intake/tuner combo and looking at Steeda, JLT, Airraid and BBK. Obviously most of your power gains come from the tune, but is there a real difference between the intakes? Or just personal preference?
04-30-2013, 07:07 PM
#2
5th Gear Member
Join Date: Jul 2009
Location: Delaware
Posts: 2,215
Welcome to the forums! For the love of God Search!
Now on to answering:
The Steeda intake and JLT 3 intake seem to produce the highest gains. If you want to spend more money than you should have but have the best looking intake, you could go with the WMS High Velocity Intake like I did and still get. I don't have dyno numbers yet and mine will be skewed because of the other mods but I expect the WMS would have made the same numbers as those two.
Now on to answering:
The Steeda intake and JLT 3 intake seem to produce the highest gains. If you want to spend more money than you should have but have the best looking intake, you could go with the WMS High Velocity Intake like I did and still get. I don't have dyno numbers yet and mine will be skewed because of the other mods but I expect the WMS would have made the same numbers as those two.
04-30-2013, 07:39 PM
#3
6th Gear Member
All of the tune-required CAI's perform equally well. The CAI is only about 20% of the combo's gain. Be more concerned about who writes your tunes. Pick the CAI based on what appeals to your eyes and wallet.
04-30-2013, 09:12 PM
#6
3rd Gear Member
Join Date: Jul 2011
Location: Florida
Posts: 732
All of the tune-required CAI's perform equally well. The CAI is only about 20% of the combo's gain. Be more concerned about who writes your tunes. Pick the CAI based on what appeals to your eyes and wallet.
Email me at tim@steeda.com if I can help provide any answers or support.
Best Regards,
TJ
04-30-2013, 09:30 PM
#7
5th Gear Member
Join Date: Jul 2009
Location: Delaware
Posts: 2,215
That sir, is my over priced, yet still awesome intake.
95mm equivalent (oval shaped and nearly matches the TB) MAF housing. Haven't had it installed AND dynoed yet but plan to this summer. The only advantage I see in this set up, which was also recorded by Muscle Mustang Magazine and 5.0 Mustang Magazine is a much lower IAT on hot days, other than that, it ran with the top two intakes as far as gains (but that was on the standard MAF size). Hard to dyno a ram air style on a dyno Unfortunately I don't have 1/4 times at all so the only way to tell the true gains... I don't have.
95mm equivalent (oval shaped and nearly matches the TB) MAF housing. Haven't had it installed AND dynoed yet but plan to this summer. The only advantage I see in this set up, which was also recorded by Muscle Mustang Magazine and 5.0 Mustang Magazine is a much lower IAT on hot days, other than that, it ran with the top two intakes as far as gains (but that was on the standard MAF size). Hard to dyno a ram air style on a dyno
Unfortunately I don't have 1/4 times at all so the only way to tell the true gains... I don't have.
05-01-2013, 12:35 AM
#9
5th Gear Member
Join Date: Jul 2009
Location: Delaware
Posts: 2,215
Hours of searching for a different intake than everyone else. Western Motor Sports is the manufacturer. http://www.wmsracing.com/ I believe they are Canadian.
Got a discount just by asking them also! Correction, a major discount!
Got a discount just by asking them also! Correction, a major discount!
Last edited by JCON; 05-01-2013 at 12:38 AM.
05-01-2013, 10:03 AM
#10
Thread Starter
Join Date: Apr 2013
Location: ON
Posts: 14
That looks awesome