Seperate fan switch
#2
There are kits on eBay that has a sensor probe you push between the cooling fins, and
you set the temperature when you want to relay to trigger.
Not sure what's wrong with the one on the thermostat housing though... That is coming
right from the engine.
You will have to drill and tap another port somewhere to add a sensor.
you set the temperature when you want to relay to trigger.
Not sure what's wrong with the one on the thermostat housing though... That is coming
right from the engine.
You will have to drill and tap another port somewhere to add a sensor.
#3
There were melt down issues under fuse box it just took out the fan circuit since the temp switch just.goes to ground to the pcm can I unhook the wire from theTemp switch and use the temp switch to break the ground to fire a relay that would have a constant hot at the coil of the relay. Will this effect the pcm. Just a fix until I can really fix the issue under the fuse block
Thread
Thread Starter
Forum
Replies
Last Post