dyno
 

i did the baseline dyno run today, 286 whp 283 wtq, but the gobbler was to lean so i turned the boost down 3 pounds on the third run and did 271 whp and 256 wtq. i also found out my boost gauge is 5 pounds off so its going in the trash as soon as i find a replacement. check out my youtube for vids and check out my got stang for the print outs.. im going to look into megasquirt.

I know some gauges are off due to altitude, but 5psi is a bit :P
You can fix them if you're on a budget by taking them apart & bending the coil in it.

OR you could just get another. :)