im in the process of stroking my 302 to a 347
#11
RE: im in the process of stroking my 302 to a 347
dont buy a kit, go with trickflow twisted wedge forged pistons, bpm forged rods, hawks racing forged crank, lunati cam with like a 535-565 lift with 114 degree lob speration, and trickflow twisted wege heads. this set up will get you the power u need. the kits allways have something not that good in it. buy them seperatly like on ebay or sometimes u can find them on clearnce at a local shop.
#12
RE: im in the process of stroking my 302 to a 347
^^ You can go that route OR you can just be simple and buy a kit from CHP or another reputable company. With the heads/trans, etc. it all depends on what you want out of the car. Personally, for a nice street setup. I would go with a CHP 347, AFR 185's, edelbrock or trickflow manifold, 70mm tb, bla bla bla.
Thread
Thread Starter
Forum
Replies
Last Post
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM
MustangForums Editor
General Tech
0
09-25-2015 06:58 PM
jaiidutch
Motor Swap Section
2
09-14-2015 10:29 AM