Just got back from the Tunning shop.
03-22-2006, 08:21 PM
#1
5th Gear Member
Thread Starter
Join Date: Apr 2005
Location:
Posts: 3,721
Just got back from the Tunning shop.
I was having trouble with my Pushrods and it turned out that the stock ones were too short.
How I know that, you ask? We meseaured it, and the rocker was sitting on the Pedestal part of the stub scraping chuncks of aluminum off.
Turns out 6.500 Pushrods were what I needed. And now she runs smoothly, I steped on it a little afterword and wow she pulls much better.
Now im putting the SC as I type this im just taking a break, let yall know when its done.
How I know that, you ask? We meseaured it, and the rocker was sitting on the Pedestal part of the stub scraping chuncks of aluminum off.
Turns out 6.500 Pushrods were what I needed. And now she runs smoothly, I steped on it a little afterword and wow she pulls much better.
Now im putting the SC as I type this im just taking a break, let yall know when its done.
03-22-2006, 08:25 PM
#3
5th Gear Member
Thread Starter
Join Date: Apr 2005
Location:
Posts: 3,721
RE: Just got back from the Tunning shop.
Yeah thanks, I knew it had to be somthing.
I also found out that my car has been Cammed, some other owner must have put a small cam in it because the guy told me that theres no way it sounds like this without a cam, plus my Vacum isnt very high.
But whatever I dont really care about the cam now I jist cant wait to bolt on the SC.
I also found out that my car has been Cammed, some other owner must have put a small cam in it because the guy told me that theres no way it sounds like this without a cam, plus my Vacum isnt very high.
But whatever I dont really care about the cam now I jist cant wait to bolt on the SC.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-01-2015 08:16 PM