Wheel backspacing
What backspacing do I need to get a set of Weld 15x 10in Drag Light wheels in the rear?
Rear suspension mods: BBk U/L Control arms Eibach Drag launch springs Lakewood Shocks (removed quad shock set-up) Thanks for the help as always guys! |
RE: Wheel backspacing
I have 6.5 in backspacing... :)
|
RE: Wheel backspacing
ORIGINAL: randy78045 I have 6.5 in backspacing... :) |
RE: Wheel backspacing
Your definitly going to have to roll the fender in bang in part of the inner fender. I think 8 inch wides would be plenty, you can run 275's with them.
|
RE: Wheel backspacing
I have 15X10.5X26 Et Streets.... rims: 15X10 w/ 6.5 backspacing... I did roll the inner fender though im not sure I needed to.... for 28's I think it would be necessary... :)
|
RE: Wheel backspacing
Dont oversize your rims but 10's are about the max... If one day you want to run slicks you might want to plan ahead... :)
|
RE: Wheel backspacing
15X10, 6.5" backspace...inner fenderwell (by the spring) "massaged:.
|
RE: Wheel backspacing
ORIGINAL: ZachW04Stang Your definitly going to have to roll the fender in bang in part of the inner fender. I think 8 inch wides would be plenty, you can run 275's with them. |
All times are GMT -5. The time now is 06:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands