Twisted wedge and piston clearance

Reply Subscribe

Thread Tools

Search this Thread

04-19-2006, 10:39 AM

AdamB

2nd Gear Member

Thread Starter

Join Date: Mar 2006

Location: PA

Posts: 152

Twisted wedge and piston clearance

Just so I have this right, if I run stock pistons on my '95 GT with an E303 cam, the Twisted wedge heads will clear my pistons right? I've heard various answers on this and just want a definite.

Thanks.

04-19-2006, 11:56 AM

eaturls1

1st Gear Member

Join Date: Jan 2006

Posts: 141

RE: Twisted wedge and piston clearance

yes as long as the block has never been milled

04-19-2006, 12:38 PM

Tims 88GT

6th Gear Member

Join Date: Jan 2005

Location:

Posts: 7,657

RE: Twisted wedge and piston clearance

the 95 has valve cut outs like the fox right? if so u can go like .540 lift on a stock short block.

04-20-2006, 04:42 AM

AdamB

2nd Gear Member

Thread Starter

Join Date: Mar 2006

Location: PA

Posts: 152

RE: Twisted wedge and piston clearance

Don't know if mine has valve cut outs... thanks for the replies, I've read where the TW heads have a little more CFM's then the AFR165's..

I'm not planning on installing for a while, so I'm just looking around checking prices.