Twisted wedge head pushrods?
04-29-2006, 06:10 AM
#12
2nd Gear Member
Thread Starter
Join Date: Mar 2006
Location: PA
Posts: 152
RE: Twisted wedge head pushrods?
Hey, thanks for the info, and your second post was a good read too. I am buying used TW's that were CNC ported. Hopefully since they were purchased in 2000, TFS worked out the issue with the stud mounts for the rockers. These heads are coming with roller rockers and pushrods. I'll check them both out to make sure they'll work with my combo.
I originally got outbid on this ebay auction, but received a 2nd chance offer of $900 shipped.
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Adam
I originally got outbid on this ebay auction, but received a 2nd chance offer of $900 shipped.
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Adam
ORIGINAL: r.barn
you do need longer push rods for the Twisted Wedge heads
you need 6.7" rods.
http://store.summitracing.com/partde...5&autoview=sku
these are the same rods they sell in their complete
kit with 1.6 rocker arms
you do need longer push rods for the Twisted Wedge heads
you need 6.7" rods.
http://store.summitracing.com/partde...5&autoview=sku
these are the same rods they sell in their complete
kit with 1.6 rocker arms
Thread
Thread Starter
Forum
Replies
Last Post
