Suggestion on Valve Covers
#21
RE: Suggestion on Valve Covers
not the dss 1.6's mine were already cut out,and still hit.
ORIGINAL: Liquid_02
All you have to do is cut a groove on the inside of the valve cover where the rockers are hitting.
ORIGINAL: grabbem88
this is what i use...some aftermarket 1.6's won't clear stock v/c's...
this is what i use...some aftermarket 1.6's won't clear stock v/c's...
#22
RE: Suggestion on Valve Covers
I got the eddelbrocks right now, but Im putting the Motorsport on next week.
I just need to clean them up a bit.
[IMG]local://upfiles/15818/B71166AEC9104D55A6012BA27D9A13B7.jpg[/IMG]
[IMG]local://upfiles/15818/613F07D08D464847814C7FD729911C2B.jpg[/IMG]
[IMG]local://upfiles/15818/C2E6AEE235114C3B91CF20BEF1AB08A4.jpg[/IMG]
[IMG]local://upfiles/15818/3A5DF9DC53B54B8999350ACFD37983DB.jpg[/IMG]
I just need to clean them up a bit.
[IMG]local://upfiles/15818/B71166AEC9104D55A6012BA27D9A13B7.jpg[/IMG]
[IMG]local://upfiles/15818/613F07D08D464847814C7FD729911C2B.jpg[/IMG]
[IMG]local://upfiles/15818/C2E6AEE235114C3B91CF20BEF1AB08A4.jpg[/IMG]
[IMG]local://upfiles/15818/3A5DF9DC53B54B8999350ACFD37983DB.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
LivingInThePast
Classic Mustangs (Tech)
2
09-16-2015 12:20 PM
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM