What do you think about this kit - MustangForums.com

Go Back  MustangForums.com > Ford Mustang Tech > 5.0L (1979-1995) Mustang
Reload this Page >

What do you think about this kit

5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

What do you think about this kit

Reply

 
 
 
Old 05-14-2006, 12:14 AM
  #1  
Twotone93stang
2nd Gear Member
Thread Starter
 
Join Date: May 2006
Location: Virginia
Posts: 267
Default What do you think about this kit

I found a Trick Flow kit that consisted of Twisted wedge heads, street intake manifold, roller camshaft, roller rocker arms, pushrods, timing chain set, gasket kit, and value covers to match. I found this kit for $2149.00 in my 5.0 Mustang magazine. Is this a good deal because i am thinking about getting it for my 93' 5.0 gt Mustang
Twotone93stang is offline  
Reply With Quote
Old 05-14-2006, 12:17 AM
  #2  
Tims 88GT
6th Gear Member
 
Join Date: Jan 2005
Location:
Posts: 7,657
Default RE: What do you think about this kit

Trick flow has some awesome ****, u will like it if u get it.
Tims 88GT is offline  
Reply With Quote
Old 05-14-2006, 01:56 AM
  #3  
crazyhorse
3rd Gear Member
 
Join Date: Feb 2005
Location:
Posts: 849
Default RE: What do you think about this kit

i have that same kit on my 93 gt . it is good . i would not change any thing if i was doing it again. i like it . you know you can get it with black or silver intake/valve covers/ stage 2 cam / tall valve covers & etc if you like ? this is from summit racing.
crazyhorse is offline  
Reply With Quote
Old 05-14-2006, 01:58 AM
  #4  
AdderMk2
Banned
 
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
Default RE: What do you think about this kit

ORIGINAL: crazyhorse

i have that same kit on my 93 gt . it is good . i would not change any thing if i was doing it again. i like it . you know you can get it with black or silver intake/valve covers/ stage 2 cam / tall valve covers & etc if you like ? this is from summit racing.
did you have to notch your pistons to run it... which cam do you have... let us know the specifics
AdderMk2 is offline  
Reply With Quote
Old 05-14-2006, 02:15 AM
  #5  
crazyhorse
3rd Gear Member
 
Join Date: Feb 2005
Location:
Posts: 849
Default RE: What do you think about this kit

did not notch pistons these are the twisted wedge heads . they have the 2.02 valves but the valve pocket is turned/or twisted so it will not hit the piston on the 5.0. not sure on the 86 year. i have the stage 1 cam but if you are not using it for a daily driver you could use the stage 2 cam. also if you get the tall valve covers you may have to run a intake spacer and there fore a cowl hood. the parts in this kit all fit & work good together, i had no problems & i liked that . the rocker are adjustable & push rods are correct . hope this helps .who are you ordering from?
crazyhorse is offline  
Reply With Quote
Old 05-14-2006, 02:18 AM
  #6  
AdderMk2
Banned
 
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
Default RE: What do you think about this kit

summit more then likely
AdderMk2 is offline  
Reply With Quote
Old 05-14-2006, 02:43 AM
  #7  
crazyhorse
3rd Gear Member
 
Join Date: Feb 2005
Location:
Posts: 849
Default RE: What do you think about this kit

i forgot to mention , you can also get the track heat intake & stage 2 or 3 cam. just don't over do it if you are going to daily drive it or do a lot of city driving. good luck.
crazyhorse is offline  
Reply With Quote
Reply
 
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
6
01-07-2018 07:16 AM
2007CalSpec
Off Topic
20
12-19-2017 04:53 AM
Lethaldosage423
Parts For Sale
1
10-19-2015 12:12 AM
flash_xx
S197 Handling Section
14
10-16-2015 07:23 AM
Drastang
4.6L (1996-2004 Modular) Mustang
2
09-30-2015 03:48 AM

Forum Jump

Thread Tools
Search this Thread
Advertising
Featured Sponsors
Vendor Directory