cowl induction
Looking for some feedback on Harwood hoods, specifically the cowl ones. Any info would be really appericiated. I've ordered 2 Cervinis in the past 2 months but they've both come damaged![:@]
|
RE: cowl induction
Nobody has a Harwood?[&o]
|
RE: cowl induction
its not cervinis fault the shipping company blows... request that they ship it through a different carrier
|
RE: cowl induction
harwood hoods are second to none. the are the best quality hoods i've ever seen.
|
RE: cowl induction
Good idea AdderMk2. Hey Riceeater I heard the same thing about Harwood, apparently they are really well built hoods. I've got a line on a used one.......mint condition no damage at all, for around $400. Only catch is it's the 4" cowl (little big maybe?), I was hoping to get the 2.5" This is driving me nucking futs! All this trouble just so I can bolt up my GT40 intake![:@] What do you guys think of the 4" cowls?
|
RE: cowl induction
i dont really like cowl hoods personally. and i agree 4 is big. are you sure you need a raised hood for a gt40 intake?
|
RE: cowl induction
I have the stock GT hood and run the GT 40 intake with no problems. It fits fine.
|
RE: cowl induction
I wanted to put the 1" spacer on as well. No way that fits, but you guys are right it does fit without the spacer. Without the spacer the fuel rails get in the way. I don't know if this is just an issue for 88's but the intake won't drop in with the stock fuel rails, the rails don't allow the intake to sit right on the lower.
|
RE: cowl induction
my car is carb'd so i need the cowl and I got a 4" that came with the car and theres still 2 inches of room to play with inbetween the the air cleaner and hood.
|
RE: cowl induction
gotcha. well if you're gettin the 4 inch for cheap you can run it for a while then sell it later on. especially if its in good condition.
|
All times are GMT -5. The time now is 10:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands