elusive1

my car is shaking whenever i brake and i'm pretty sure it's the rotors.

just wondering what you guys would reccomend i purchase. i'm not looking for racing performance, just something decent to replace the OE rotors i have now.

88BlueGT

Well, you can get regular rotors from autozone or advanced auto or someplace like that OR you can go with a set of powerstops for cheap...

r.barn

these
http://www.stainlesssteelbrakes.com/...tang&year=1989


or these
http://www.stainlesssteelbrakes.com/...tang&year=1989
i think the 73mm calipers in this kit are same ones off a Lincoln and could
be found cheaper that route.

tinman

OE type replacement (good quaility) about $33.50 each. I know as I just got 2 of them for '84.....

PRO50SC

Measure them and have them machined if there is enough material.

tinman

If you have a Fox body, I think the mininum thickness is .810 think that if its within .030 of that, junk 'em.......

PRO50SC

The 5.0's are thicker. Can't remember the spec though.

tinman

No, that spec is for all 5.0 fox boy cars from '79-whenever. The .030 I'm mentioned is thicker. i.e. .810 to .840. If they were less than .840, I'd junk em........

PRO50SC

Try again, they are NOT .810!

PRO50SC

.