331 info
#1
331 info
Hi,
I have a 94 GT 5speed mustang. I was wondering a few things, i want to get a 331 stroker and i was wondering what kit you guys think i should get and what else should i get, i know i need new heads, intake, exhaust, cam, etc. but i was wondering what companys have the best product. I have a few choices already like AFR 185's and a bbk long tubes with shorty h-pipe and flowmaster cat-back and i was wondering if are the right products for a 331. I would like to know what are good products for the other parts of the engine like cam and intake and what would be a good trans and rear-end gears and any other part that would go along with this and i would like this to be a street car
I was also wondering was would be the power with a 331 with good mods and what the price range would be for the engine mods
i would also like to keep it efi and would like to know what mod would go with that for a 331
thanks in advance
I have a 94 GT 5speed mustang. I was wondering a few things, i want to get a 331 stroker and i was wondering what kit you guys think i should get and what else should i get, i know i need new heads, intake, exhaust, cam, etc. but i was wondering what companys have the best product. I have a few choices already like AFR 185's and a bbk long tubes with shorty h-pipe and flowmaster cat-back and i was wondering if are the right products for a 331. I would like to know what are good products for the other parts of the engine like cam and intake and what would be a good trans and rear-end gears and any other part that would go along with this and i would like this to be a street car
I was also wondering was would be the power with a 331 with good mods and what the price range would be for the engine mods
i would also like to keep it efi and would like to know what mod would go with that for a 331
thanks in advance
#4
RE: 331 info
ORIGINAL: cv94 mustang gt
I would like to know what are good products for the other parts of the engine like cam and intake and what would be a good trans and rear-end gears and any other part that would go along with this and i would like this to be a street car
thanks in advance
I would like to know what are good products for the other parts of the engine like cam and intake and what would be a good trans and rear-end gears and any other part that would go along with this and i would like this to be a street car
thanks in advance
#6
RE: 331 info
check out www.dssracing.com or www.keithcraft.com they list the power levels their long blocks put out with various cams and heads.
Thread
Thread Starter
Forum
Replies
Last Post
folivier
Tennessee Regional Chapter
4
10-02-2015 05:32 AM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM