hesitating stroker at wot
06-15-2006, 12:03 AM
6th Gear Member
Join Date: Dec 2003
Location: cape giradeau,mo
Posts: 8,872
RE: hesitating stroker at wot
is that just with 30's what's 24's?
Quote:
ORIGINAL: silver91gt
50psi is too high, you should be okay with the 30#ers at 40psi.
injector flow rate is measured at 40psi.
06-15-2006, 12:05 AM
1st Gear Member
Thread Starter
Join Date: May 2006
Location:
Posts: 56
RE: hesitating stroker at wot
the car ran 7.73 in the 1/8.
06-15-2006, 12:05 AM
5th Gear Member
Join Date: Jan 2006
Location:
Posts: 2,103
RE: hesitating stroker at wot
well thats probably his problem, especially if it runs great past 2800. that thing should be going through tires like it goes through gas!
Quote:
ORIGINAL: silver91gt
50psi is too high, you should be okay with the 30#ers at 40psi.
injector flow rate is measured at 40psi.
06-15-2006, 12:06 AM
5th Gear Member
Join Date: Mar 2005
Location:
Posts: 3,195
RE: hesitating stroker at wot
I guess the cam haqs a big part on fuel demands.
I have a b-303 cam and run only 30psi 24# injectors, wideband A/F on the dyno showed 13-1
06-15-2006, 12:08 AM
6th Gear Member
Join Date: Dec 2003
Location: cape giradeau,mo
Posts: 8,872
RE: hesitating stroker at wot
then my custom cam is tearing it up then?....7.73?...that's awsome man
06-15-2006, 12:10 AM
1st Gear Member
Thread Starter
Join Date: May 2006
Location:
Posts: 56
RE: hesitating stroker at wot
I have set a date with the local dyno. They mostly tune rice, but in Mississippi we have to take what we can get. This is why I am trying to get tips from mustang guys not the honda boys.
06-15-2006, 12:11 AM
5th Gear Member
Join Date: Mar 2005
Location:
Posts: 3,195
RE: hesitating stroker at wot
Quote:
ORIGINAL: 91dsslx
the car ran 7.73 in the 1/8.
thats pretty good, I had a 12.3 quarter mile run with my 1/8 time of 8.2.
06-15-2006, 12:11 AM
6th Gear Member
Join Date: Dec 2003
Location: cape giradeau,mo
Posts: 8,872
RE: hesitating stroker at wot
i here ya.
06-15-2006, 12:13 AM
5th Gear Member
Join Date: Mar 2005
Location:
Posts: 3,195
RE: hesitating stroker at wot
Quote:
ORIGINAL: grabbem88
then my custom cam is tearing it up then?....7.73?...that's awsome man
for sure, I run a 13.2 n/a with the same combo, except the cams.
06-15-2006, 12:15 AM
6th Gear Member
Join Date: Dec 2003
Location: cape giradeau,mo
Posts: 8,872
RE: hesitating stroker at wot
you have 185's?