5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

gears

Thread Tools
 
Search this Thread
 
Old 07-12-2006, 07:51 PM
  #1  
GaryBisiniere
3rd Gear Member
Thread Starter
 
GaryBisiniere's Avatar
 
Join Date: Mar 2006
Location:
Posts: 763
Default gears

i wanna upgrade my gears in my car and rebuild the clutches on my limiteds slip. is it a hard job to do it myself? and what parts will i need?
thanks gary
GaryBisiniere is offline  
Old 07-12-2006, 07:53 PM
  #2  
primetime5.0
6th Gear Member
 
primetime5.0's Avatar
 
Join Date: Dec 2003
Location: United States
Posts: 9,587
Default RE: gears

pay someone else
primetime5.0 is offline  
Old 07-12-2006, 07:54 PM
  #3  
GaryBisiniere
3rd Gear Member
Thread Starter
 
GaryBisiniere's Avatar
 
Join Date: Mar 2006
Location:
Posts: 763
Default RE: gears

i heard its not hard.
GaryBisiniere is offline  
Old 07-12-2006, 08:07 PM
  #4  
7upedition
5th Gear Member
 
7upedition's Avatar
 
Join Date: May 2005
Location: Central New York
Posts: 3,850
Default RE: gears

we need more info on your car.. what tranny, what mods, what are your intentions, do you do a lot of highway driving or are you 1/8th mile or are you 1/4 mile? rule of thumb is 3.73 for auto and 3.55 for 5 spd... those are good middle of the road gears and they wont rev too high on the highway... it'll cost you about $400 from summitt for 3.73, trak lok rebuild kit and install kit plus u'll need 3 quarts of gear oil... and if your kit doesn't come with the whale sperm (trak lok additive or limited slip additive) then you'll need that too!

BEST MOD EVER!!!!!
7upedition is offline  
Old 07-12-2006, 08:55 PM
  #5  
88BlueGT
6th Gear Member
 
88BlueGT's Avatar
 
Join Date: Sep 2005
Location: Hamilton, NJ
Posts: 15,042
Default RE: gears

And than add in atleast $400 dollars to have the gears/trac lok kit installed. Also, if you do not drive on the highway all day long and its an automatic I would go with 4.10's (guessing that you just have minor bolt ons, etc.). If you are going with a blower or something in that area than I personally wouldnt go any higher than 3.73's.
88BlueGT is offline  
Old 07-12-2006, 09:07 PM
  #6  
GaryBisiniere
3rd Gear Member
Thread Starter
 
GaryBisiniere's Avatar
 
Join Date: Mar 2006
Location:
Posts: 763
Default RE: gears

i got a 5 speed and its not my everyday driver. i was thinkin 4 10s. how hard is it to do it myself?
GaryBisiniere is offline  
Old 07-12-2006, 09:10 PM
  #7  
Black Snake
5th Gear Member
 
Black Snake's Avatar
 
Join Date: Apr 2005
Location:
Posts: 3,721
Default RE: gears

I did mine wasnt that hard but you have to make sure and shim it right.
Black Snake is offline  
Old 07-12-2006, 09:11 PM
  #8  
GaryBisiniere
3rd Gear Member
Thread Starter
 
GaryBisiniere's Avatar
 
Join Date: Mar 2006
Location:
Posts: 763
Default RE: gears

how do you go about shimming it?
GaryBisiniere is offline  
Old 07-12-2006, 09:15 PM
  #9  
OneFine89Mustang
4th Gear Member
 
OneFine89Mustang's Avatar
 
Join Date: Aug 2005
Location:
Posts: 1,410
Default RE: gears

i would pay and have someone else do it
OneFine89Mustang is offline  
Old 07-12-2006, 09:25 PM
  #10  
GaryBisiniere
3rd Gear Member
Thread Starter
 
GaryBisiniere's Avatar
 
Join Date: Mar 2006
Location:
Posts: 763
Default RE: gears

ya thats 400$ ontop of the 400$ for parts
GaryBisiniere is offline  


Quick Reply: gears



All times are GMT -5. The time now is 05:06 AM.