EFI to CARB on an AUTO 5.0
07-23-2006, 07:46 PM
#5
I ♥ Acer
Join Date: Feb 2006
Location:
Posts: 2,039
RE: EFI to CARB on an AUTO 5.0
my chevy was a carb and auto, and used a tv cable...
most people switch to carb because they are running modified/drag cars and in that case they either have a 5 speed or a C4 (3 speed no O/D)
most people switch to carb because they are running modified/drag cars and in that case they either have a 5 speed or a C4 (3 speed no O/D)
07-23-2006, 07:49 PM
#6
2nd Gear Member
Thread Starter
Join Date: Mar 2006
Location: Rock Hill, South Carolina
Posts: 198
RE: EFI to CARB on an AUTO 5.0
well I have to change the TV cable and the throttle cable. I was just wondering if anyone had any problems doing this. I bought both cables from Loker Dis.
07-23-2006, 08:01 PM
#10
2nd Gear Member
Thread Starter
Join Date: Mar 2006
Location: Rock Hill, South Carolina
Posts: 198
RE: EFI to CARB on an AUTO 5.0
ORIGINAL: 88stangaruu
damn crump...i see you made 471hp at the fly with a 308...you got a list of mods....sorry to jump topic...
damn crump...i see you made 471hp at the fly with a 308...you got a list of mods....sorry to jump topic...
302 bored .30 over, Forged alum pistons, Comp Cams XE274HR roller cam, Scat rods, Scat crank, Pro Comp Alum heads fully ported and polished w, 2.055, 1.60 valves, scorpion roller rockers, Victor Jr. intake, Barry Grant Speed Demon 650 w/ mech sec. and electric choke,. All inturnals were fully balanced and bluprinted. Im pretty sure I missed alot, but take a look at the dyno sheet @ 5700 RPM.
[IMG]local://upfiles/32019/281D8DFE92A54264BAB73918526523A2.jpg[/IMG]