tips on getting collectors to seal
#1
tips on getting collectors to seal
it seems like everytime i do anything with taking off my midpipe i cant get the damn thing to seal again at header collector. i've tried everything i can think of (short of getting screen material and copper rtv and making a gasket) anyone have any tip or tricks. btw i am using an electric inpact wrench.
#2
RE: tips on getting collectors to seal
ORIGINAL: I3atR!ce
btw I am using an electric inpact wrench.
btw I am using an electric inpact wrench.
You probably already deformed the flanges and\or the "cone" of the header\exhaust manifold.....
Sorry to say; but i can't help you other than to suggest you take it appart again & carefully look at everything closely.....
#3
RE: tips on getting collectors to seal
loosen up your header bolts from your heads. so you can wiggle it a little, then snug everything up so it all fits good. then go back and tighten everything back up. might help?
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM
autoedit
General Tech
0
09-27-2015 06:37 PM