mrbigshot

works out to be a 25.6" tire

at 70 mph in overdrive with

2.73 = 1680
3.08 = 1896
3.23 = 2013
3.55 = 2185
3.73 = 2296
3.90 = 2401
4.11 = 2530

91lxstang

thats not right man ur doin sumthin wrong....... my 3.23's rev a good bit higher than that.... not bein an azz

mrbigshot

math doesnt lie, like i said your converter could be slipping or your tach is way off.

91lxstang

i dont know im gettin another tack in a month or so and a new converter so we will see then...

95hooptey

Mr big...............thanks for the lesson on convertors. I actually do understand what its doing now. This pretty much the way I figured it but NO ONE would say those words until you did. Some of these guys would strat talking from the engine then the drive train and then tires but not in sequence so it was always clear as mudd..

I have 245 17" tires on mine so I guess I am about 26.5" overall? With an AOD_E and 4.10s I should be at around 2500 rpms???

So nothing over a 2500 stall? I will doing in town driving mostly..............................I am sure I will have trans coolers as well.

mrbigshot

245/ ?/ 17

i need the ? for the aspect ratio and i will figure it out. overdrive is still .67 on the aod-e so it whould be close.

1BIGMOFO

4.10's and a good stall converter will do you good man, gears are one of the most noticible differences youll get!