3000 rpm stall converter
#1
3000 rpm stall converter
What exactly is a stall converter? Is it the same as a torque converter? Someone told me to get one. They said 3000, but no less than 2800 and what is the best kind to get? This is new to me so I need to be filled in on what exactly this does and what I will get out of it.
[IMG]local://upfiles/42869/FA88E8F7DB5746E0B364C38974C24A93.jpg[/IMG]
[IMG]local://upfiles/42869/FA88E8F7DB5746E0B364C38974C24A93.jpg[/IMG]
#2
#3
#4
RE: 3000 rpm stall converter
Mrbigshot gave me a good lesson on converters a few days ago (column he attached) but.......that column you posted (2 kwik) is the bomb.................
Its hard to explain all of that in simple english..with out writing a full colum about it! Thanks for the info.
Its hard to explain all of that in simple english..with out writing a full colum about it! Thanks for the info.
#8
RE: 3000 rpm stall converter
i wouldnt bother with a 2500. remember that the number is just a guess. a low hp motor hooked to a 2500 stall will probably stall 2200-2300 at best.
if you do buy a converter, go with edge racing. they custom make you a converter according to your car, mods, and the type of driving you will be doing. down side is that an edge racing converter will set you back about $500
if you do buy a converter, go with edge racing. they custom make you a converter according to your car, mods, and the type of driving you will be doing. down side is that an edge racing converter will set you back about $500