Bummer of a leakdown test
 

25% Loss on cyl 6 going up through the intake.

So new heads it is! And while I'm at it new intake manifold, throttle body, and egr spacer. I also need a new intake as I just noticed my stock filterbox is broken on the bad side. :(

Bummer of a leakdown test
 

....you should be happy....it's a perfect excuse!!

Bummer of a leakdown test
 

That it is...

They yanked the heads off today - #6 was scored at the bottom and the valves were bunged up.

So... .030" over bore, forged pistons, F303 cam, aluminum heads, new intake manifold, 70mm TB&EGR, Mac CAI, 75-ish (haven't picked one out yet) MAF, balanced and stuffed back in. :)

Already have Mac headers, no cats, H-pipe, and Flowmasters (2-chambers iirc), so I'm hoping for the best.


Funny part is that even with #6 screwed up it was still putting over 200 hp to the rear wheels.

Bummer of a leakdown test
 

Horatio,</P>


How much is all that costing you? and where are you located?</P>

Bummer of a leakdown test
 

Estimate is about five large. But then there's always ebay for the leftover stuff. A couple hundred bucks and the heads are good as new, etc.

I'm up in Bellingham, WA right by the border.

The car should be a hoot when it is done.

Bummer of a leakdown test
 

Sounds like it should be a f****n rocket!!!

Bummer of a leakdown test
 

That's what I' m hoping for. :D