Myfetang

Just wondering, when I installed the intake manifold, I did not hook the line to where the EGR used to be. I did this because there is only a line "in" and not "out" like there is with the EGR, is this proper or is this trouble? My buddy who helped with pretty much all of the install, had did the same thing to his. When he did his he said that he hooked the line up but it filled his motor with coolant.

Here's a pic. As you can see I just plugged it off.


[IMG]local://upfiles/27891/7FBBF28A526C4148AD9724DB654AF503.jpg[/IMG]

Twister

I plugged my water line into the intake and by-passed it on my Cobra intake also

Myfetang

Ok, so there is no negatives that can occur from plugging it off then?

Twister

just that the EGR takes a little longer to work

marx91

no, you could have just used a vacum cap, but normally a hose goes from there to your canister

Myfetang

perfect, thanks fellas! Appreciated