fmr47chief

Hey all,

I can't seem to find a diagram fuse configuration, my turn signals and hazard lights aren't working. I have changed out bulbs and the flasher assembly. Am I missing something or does any have a remedy? I am also about to look for new wiring harnesses as the car was indeed a state trooper car and the wiring for all the extra lights, siren, spotlights and P.A. system is still installed. The guy who had it before I did, never bothered to cover the wiring when the car got painted. Help!!!

da chief

samseed101

I don't have a 91, but from what I can see, it looks liek this one should match up:

fmr47chief

Thanks for the help, you at least gave me a good starting point. Fingers-crossed, I'll get the signals working so I can drive it legally or Signals-crossed, I'll get the finger from everyone else.

da chief

onetrickpony

What year is that from?

samseed101

I believe that is for a 5.0 dating from 93 down. Not sure how far back it goes though. I know 94 and 95 are different. never checked for anything after that.

fmr47chief

Well after some homework and wirechasing, it was in fact a missing piece of the wiring harness. When the car was stripped of its lights, siren, P.A., etc, the harness was cut apart. The guy who had it before me was only planning on using the car on the track, so he had no need for turn signals.

Long story short, went to a junk yard found a harness on an old '93 GT, paid a little bit for labor and wah lah!!! I am street legal!!!

da chief