lost and ford can't get it
06-15-2004, 02:36 AM
#1
Thread Starter
Join Date: Mar 2004
Location:
Posts: 34
lost and ford can't get it
I got my new 342 in my 94 cobra and have everything done but the harnes that goes from the pass side fire wall back down to the switches on the trann and I think it must operate the clutch pushed in switch and ford can't get it ..WHAT CAN I DO... for real any one know what or where I can find one? can't find one at the junkyards.I need the car going because after spending a week on line I found a small co. that will build me a turbo with the turbo4,intercooler,fms,all valves and I mean a complete system for $2,000 so u can see why I need it soon.so HELP....slickmustang
06-15-2004, 08:45 PM
#4
Thread Starter
Join Date: Mar 2004
Location:
Posts: 34
RE: lost and ford can't get it
can you believe this kind of deal?the cheapest turbo I found any where else for the same kind of power was around $4,200 and I realy didn't believe him but after talking to him I think he is the real deal it's a little over $2,ooo it's $2,200 .I was planning on getting a water/met system to cool thangs down because it looks like that would be cheaper then getting a intercooler but for the price he is giving i'll stay with his intercooler.here is his email address.....blaast@blaastperformance.com and he don't mind talking to you guys as much as you want but if you give him my name it will save you some $$$$$$ my name is STEVE RAY AND MY EMAIL IS STER728@CS.COM let me know how it goes because I am getting a turbo from him next month it just is to good of a deal to let go by.....slickmustang If any one is looking for some rear window lovers for your 94 to 2003 for $400 let me know I have found some of the best deals any where
06-15-2004, 08:52 PM
#5
Thread Starter
Join Date: Mar 2004
Location:
Posts: 34
RE: lost and ford can't get it
I found stangparts.com name in mmff this morning and he don't have the wiring plug either any other places where I can try.ford can't get it none of the local junkyard has it and after spending $10,000 on my 342 that D&D had built the short block with low compression and big cam and after taking 3 years to get to this point im really bummed about not being able to find one dam wire to get it going so please let me know where i might find one...slickmustang
06-16-2004, 02:36 AM
#7
6th Gear Member
Join Date: Jan 2004
Posts: 5,836
06-16-2004, 03:38 AM
#8
5th Gear Member
Join Date: May 2004
Location: Redondo Beach, CA
Posts: 2,128
06-16-2004, 03:55 AM
#9
6th Gear Member
Join Date: Jan 2004
Location: United States
Posts: 12,575
RE: lost and ford can't get it
Do you have a wiring diagram that tells you what wires go to which point?? If you can get ahold of one you should be able to make your own wiring harness.
Just take the plug connection point out, and if there are wires behind it you can wire direct. Make sure to seal it up with some sort of caulk etc after you are done.
Just take the plug connection point out, and if there are wires behind it you can wire direct. Make sure to seal it up with some sort of caulk etc after you are done.
06-16-2004, 05:04 AM
#10
2nd Gear Member
Join Date: Mar 2004
Location:
Posts: 228
RE: lost and ford can't get it
I heard Ford only gives those out to people who use punctuation. [sm=smiley32.gif]
No but damn, i want a 2,000$ turbo. That's the complete kit. Everything needed? Sure you're not gettin' scammed?
No but damn, i want a 2,000$ turbo. That's the complete kit. Everything needed? Sure you're not gettin' scammed?