HACKGT350

ok im coming into a good amount of money somewhere between 4 and 6 grand and i wanted to know what you guys think i should do but hear me out first. first thing i want to do is my suspention all maximum motorsports

h/d lowers and uppers
springs
a-arms offset
k-member
sway bars
and all new bushings

as for the motor im gunna buy a 351 block and stock it to a 408
all forged internals
afr 185cc heads
not sure which intake
and a good sized carb to go with it

randy78045

I dont think youre gonna have enough money... [:-]

P Zero

It all looks good, but heres what I would change and/or add. Get subframe connectors and a panhard rod. And if youre going to stroke it to a 408, Id get the 225's rather than the 185's. Or you can get the TFS-R heads.
-P.

88stangaruu

dont wast your time with a Forged crank in a stock 351 block, waste of money. Just go with a cast crank and have the rest forged.

HACKGT350

well now i found out i might be getting twice the amout listed above i love getting cars for free. im getting two cars for free one needs a sensor the owners dont know that and the other needs rear brake lines and im gunna just sell them both