Ninety5five0

I'm doin a HCI. the cam is a tfs stage1, gt40p heads, and a trickflow intake. Would it be better to get new lifters ? or will it be fine to use the stock ones ? They have around 110,000 on em.
Also, is it a better idea to get new pushrods too ?

RawGtPower

youd want to get some hardened pushrods with those new heads, everything else is new you might as well get new lifters and rockers

92hatchLX

I'd get new lifters.

PX429

yeah don't install a new cam without new lifters

Tims 88GT

and again yes get new lifters. if you use the stock rockers make sure you install the filcrum the right way in the rocker.

Ninety5five0

So it would be best to get new pushrods, lifters, and rockers ? I should still stick with the stock rocker size 1.6 ? I dont want to get new valve covers, and i'm not too sure if 1.7's will be too much lift.

ibanezta

don't even bother considering not getting new. they are cheap enough to do it the right way and get all new parts for that specific mod. don't half *** it other wise something is bound to fail and you'll regret not getting all new parts.

92hatchLX

PM sent about brand new in box Ford Racing hydraulic roller lifters, lemme know if you want them.