pushrods???
#1
pushrods???
Anyone use the TF pushrods? What is the stock pushrod length? Also will these FRPP springs work good with the TFS 1 cam?
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
#2
RE: pushrods???
I use TF pushrods, its hard to say what length you need, depending if your block or heads have been milled. Also 1.7 rockers will require a diff length. best thing is to buy a length checker (about $10) and measure. If you haven't messed with your block at all, and you don't have 1.7 rockers I would use the size/part number that comes in the TFS top end kit. TFS-21406700 that's the part number, 6.700 in.
Thread
Thread Starter
Forum
Replies
Last Post
Dan89lx
5.0L (1979-1995) Mustang
0
02-16-2005 09:04 PM