5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

spring isolator question

Thread Tools
 
Search this Thread
 
Old 10-17-2006, 03:24 PM
  #1  
91lxstang
5th Gear Member
Thread Starter
 
91lxstang's Avatar
 
Join Date: Apr 2005
Location: hagerstown, maryland
Posts: 3,251
Default spring isolator question

i got new prothane/ urethane spring isolators for the front and back... do you guys think installing these will raise the front up at all since im not runnin any spring isolators up front right now? i need to raise the front up about a quarter inch cause with the eibach sportline springs its just too low for the new front end i put on my car.... these new isolators are pretty think and pretty hard material
91lxstang is offline  
Old 10-17-2006, 03:25 PM
  #2  
2 kwik
I ♥ Acer
 
2 kwik's Avatar
 
Join Date: Apr 2006
Location:
Posts: 5,116
Default RE: spring isolator question

that's about what you will get about 1/4"-1/2" or so....
2 kwik is offline  
Old 10-17-2006, 03:28 PM
  #3  
91lxstang
5th Gear Member
Thread Starter
 
91lxstang's Avatar
 
Join Date: Apr 2005
Location: hagerstown, maryland
Posts: 3,251
Default RE: spring isolator question

good cause i need it lol
91lxstang is offline  
Old 10-17-2006, 03:28 PM
  #4  
2 kwik
I ♥ Acer
 
2 kwik's Avatar
 
Join Date: Apr 2006
Location:
Posts: 5,116
Default RE: spring isolator question

if you had no iso..then you looking at .75"
2 kwik is offline  
Old 10-17-2006, 03:29 PM
  #5  
91lxstang
5th Gear Member
Thread Starter
 
91lxstang's Avatar
 
Join Date: Apr 2005
Location: hagerstown, maryland
Posts: 3,251
Default RE: spring isolator question

yea i had none on the front .... i have the old ones on the back but they were pretty worn..... im just gonna replace them all
91lxstang is offline  
Old 10-17-2006, 03:37 PM
  #6  
OnyxCobra
6th Gear Member
 
OnyxCobra's Avatar
 
Join Date: Nov 2005
Location: Rochester, NY
Posts: 8,467
Default RE: spring isolator question

will urethane isolators raise the front end up over stock isolators or wil it be the same height?
OnyxCobra is offline  
Old 10-17-2006, 03:43 PM
  #7  
91lxstang
5th Gear Member
Thread Starter
 
91lxstang's Avatar
 
Join Date: Apr 2005
Location: hagerstown, maryland
Posts: 3,251
Default RE: spring isolator question

im not sure what the stock isolators look like new but these new ones are pretty thick and pretty hard..... if i had to guess id say yea alittle
91lxstang is offline  
Old 10-17-2006, 04:12 PM
  #8  
OnyxCobra
6th Gear Member
 
OnyxCobra's Avatar
 
Join Date: Nov 2005
Location: Rochester, NY
Posts: 8,467
Default RE: spring isolator question

dam, i want to get new isolators b/c mine are shot but i dont want my car sitting any higher. if anything i want lower do you have a link to the ones you bought?
OnyxCobra is offline  
Old 10-17-2006, 04:13 PM
  #9  
91lxstang
5th Gear Member
Thread Starter
 
91lxstang's Avatar
 
Join Date: Apr 2005
Location: hagerstown, maryland
Posts: 3,251
Default RE: spring isolator question

http://stangsuspension.com/store/com...idCategory=111
91lxstang is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PullTab
S197 Handling Section
1
10-30-2015 08:46 AM
9550
5.0L (1979-1995) Mustang
10
10-26-2015 05:01 PM
EASTIDEE123
5.0L (1979-1995) Mustang
14
09-14-2015 03:52 PM
robjh22
Suspension
0
09-08-2015 12:47 PM
tj@steeda
Steeda Autosports
0
09-01-2015 08:16 PM



Quick Reply: spring isolator question



All times are GMT -5. The time now is 04:20 AM.