5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

tranny problems

Thread Tools
 
Search this Thread
 
Old 10-23-2006, 09:19 PM
  #1  
88_5.0
2nd Gear Member
Thread Starter
 
88_5.0's Avatar
 
Join Date: Nov 2004
Location: Illinois
Posts: 438
Default tranny problems

Hey guys, this crap just started yesterday. It's been harder than hell to put it into 1st gear at a stop light and difficult to shift into 2nd. I just thought that it was the cold weather but thats not it. Another problem is that technically if you are sitting still with the clutch pushed in, you should be able to put it into any gear (maybe except reverse). I was just sitting still with the car running, putting it through the gears and it would not go into 3rd- it just grinds. So, is there a transmission rebuild in my near future?
88_5.0 is offline  
Old 10-23-2006, 09:28 PM
  #2  
fourfivefour
3rd Gear Member
 
fourfivefour's Avatar
 
Join Date: Oct 2006
Location:
Posts: 510
Default RE: tranny problems

It sounds like your clutch is not dis engauging. Do you still have the stock plastic self adjusting clutch quadrant?
fourfivefour is offline  
Old 10-23-2006, 10:33 PM
  #3  
88_5.0
2nd Gear Member
Thread Starter
 
88_5.0's Avatar
 
Join Date: Nov 2004
Location: Illinois
Posts: 438
Default RE: tranny problems

no i have an aftermarket aluminum quadrant, havent checked that. Also at around 2k rpms (any gear) ive got a vibration in the shifter and the center of the car. Any ideas?
88_5.0 is offline  
Old 10-23-2006, 10:40 PM
  #4  
GaryBisiniere
3rd Gear Member
 
GaryBisiniere's Avatar
 
Join Date: Mar 2006
Location:
Posts: 763
Default RE: tranny problems

i got the same damn problem i wish i knew what it was!
GaryBisiniere is offline  
Old 10-23-2006, 10:41 PM
  #5  
fourfivefour
3rd Gear Member
 
fourfivefour's Avatar
 
Join Date: Oct 2006
Location:
Posts: 510
Default RE: tranny problems

It sounds like your cable is loose. Adjust it. If you dont have an adjustable cable get one. Check your motor mounts, trans mount, and u-joints.
fourfivefour is offline  
Old 10-23-2006, 10:41 PM
  #6  
GaryBisiniere
3rd Gear Member
 
GaryBisiniere's Avatar
 
Join Date: Mar 2006
Location:
Posts: 763
Default RE: tranny problems

its not hard for me to put into gear tho... but it vibrates like craazzyy over 2gs. any ideas!?
GaryBisiniere is offline  
Old 10-23-2006, 10:42 PM
  #7  
GaryBisiniere
3rd Gear Member
 
GaryBisiniere's Avatar
 
Join Date: Mar 2006
Location:
Posts: 763
Default RE: tranny problems

ive replaced both u joints and checked every mount
GaryBisiniere is offline  
Old 10-23-2006, 11:27 PM
  #8  
GaryBisiniere
3rd Gear Member
 
GaryBisiniere's Avatar
 
Join Date: Mar 2006
Location:
Posts: 763
Default RE: tranny problems

any1?
GaryBisiniere is offline  
Old 10-24-2006, 01:38 AM
  #9  
GaryBisiniere
3rd Gear Member
 
GaryBisiniere's Avatar
 
Join Date: Mar 2006
Location:
Posts: 763
Default RE: tranny problems

?
GaryBisiniere is offline  
Old 10-24-2006, 01:53 AM
  #10  
dimebag
6th Gear Member
 
dimebag's Avatar
 
Join Date: May 2006
Location: earleville md
Posts: 10,357
Default RE: tranny problems

tough w. everygear=clutch problem, possible its ALL your syncros, but highly unlikely
just a select few=syncros
vibrations=way to many options, ujoints, mounts, something bent, something outa place, etc, etc.
dimebag is offline  


Quick Reply: tranny problems



All times are GMT -5. The time now is 02:08 PM.