Derexan

I'm thinking about a new Clutch, What kits do you recommend?
Then i'm thinking 3.73 Rear end gears
Then CAI
Exhuast And headers
Ignition
Engine Building time

Dbeck002

Dont forget a 65 or 70 mm throttle body and 75mm MAF sensor. Get a fuel pressure regulator too so you can play with the air/fuel mixture. Get a bigger fuel pump while your at it. oh and get electric radiator fans and new spark plugs and MSD blaster coil.... hope this helps.

pro5.0stang

if it were me the very first thing i would do is an offroad h pipe and a good set of muffs, it will free up some good horse power. the clutch i would reccomend is the ford racing HD clutch with a steeda cable and quadrent. thats what i put in mine, its great.

Dbeck002

nice ***.

Chubstang

i'm thinkin 3.73s then X pipe and mufflers

71455olds

I went exhaust & 3:55's replace the clutch when it goes mike has 98k on it & is just starting to go.

roundman

cold air intake first followed by headers and exhaust then go for the gears and clutch.