View Poll Results: A poll
Holley
0
0%
Voters: 16. You may not vote on this poll
HEADS
#1
HEADS
I just purchased a set of Trick Flow Track Heats.I was wondering what people are really using out there.
Bare in mind that i'm looking for performance in the 1500 to 6500 rpm range.
Rye
Bare in mind that i'm looking for performance in the 1500 to 6500 rpm range.
Rye
#5
RE: HEADS
I hav'nt run the car on the dyno with the trick flow's of old yet.
It was putting out 370hp and 360lb ft at the wheels with gt-40 heads.But now i want to put these Track Heats on because of the flow it manages,and the valves it has.That dyno pull was made with the temp outside at 95 degrees and high humidity.
I'm hoping that the tuner can work some magic for me and get as close as possible to my 450@wheels mark that i want.
Rye
It was putting out 370hp and 360lb ft at the wheels with gt-40 heads.But now i want to put these Track Heats on because of the flow it manages,and the valves it has.That dyno pull was made with the temp outside at 95 degrees and high humidity.
I'm hoping that the tuner can work some magic for me and get as close as possible to my 450@wheels mark that i want.
Rye
#6
RE: HEADS
damn good luck man i bet you can do it with your nice supercharger. I am doing a twin turbo project for the winter and more engine work. So i hope all goes well with you man. If you need any help dont be afaid to ask. Alright peace out for the night.
~Nick
~Nick
Thread
Thread Starter
Forum
Replies
Last Post