475+ hp dyno on 357W :) :revised
#11
RE: 450+ hp dyno on 357W :)
I'll be sure to post up exact details when they are done.
has a carb on it and a different intake than I'm going to use
but they are using the shorty headers I will install.
Going over there now to watch the 2nd and 3rd pulls.
has a carb on it and a different intake than I'm going to use
but they are using the shorty headers I will install.
Going over there now to watch the 2nd and 3rd pulls.
#15
RE: 450+ hp dyno on 357W :)
ORIGINAL: r.barn
I'll be sure to post up exact details when they are done.
has a carb on it and a different intake than I'm going to use
but they are using the shorty headers I will install.
Going over there now to watch the 2nd and 3rd pulls.
I'll be sure to post up exact details when they are done.
has a carb on it and a different intake than I'm going to use
but they are using the shorty headers I will install.
Going over there now to watch the 2nd and 3rd pulls.
#20
RE: 475+ hp dyno on 357W :) :revised
ok, just got back.............
476.4hp at the crank at 6,100 rpm
ran it up to 6,100 rpm and held it there for a couple of secs
while it was holding that rpm he took some "snap shot" readings.
captured 474 to 476 at 6,000-6,100 rpm
on normal run up and release we captured 468hp at 5,900 rpm and 433 ft/lbs trq at 5,400 rpm
this is with:
357ci
10:1 c/r
AFR 185's
CompCams xFi cam .579/.579 236/248
VicJr. intake
750 carb
windage tray
Long tube headers
Will post up pics and vid in a bit after I work them up.
476.4hp at the crank at 6,100 rpm
ran it up to 6,100 rpm and held it there for a couple of secs
while it was holding that rpm he took some "snap shot" readings.
captured 474 to 476 at 6,000-6,100 rpm
on normal run up and release we captured 468hp at 5,900 rpm and 433 ft/lbs trq at 5,400 rpm
this is with:
357ci
10:1 c/r
AFR 185's
CompCams xFi cam .579/.579 236/248
VicJr. intake
750 carb
windage tray
Long tube headers
Will post up pics and vid in a bit after I work them up.