frdmstng1986GT

Check this out. http://www.camshaftinnovations.com/HydraulicRoller.htm <--- thats him.

89GTRed

thanks bro!

primetime5.0

just buy an off the shelf cam, no need for a custom grind

89GTRed

well thats what I was asking, if you have any suggestions that'd be great. Which shelf cam would do good? I had a e 303 cam offered for a good price but I dunno what cam Would be good with this setup.

primetime5.0

you have emissions?

grabbem88

i use a custom grind cam..from jay allen....i'm in the 11.90's right now with a afr 185/rpm intake/cam..i will tell you this..i thought i built the suspension/driveline bullet proof...boy was i wrong his design created my car to accelerate past my cars strength...

89GTRed

yea i got emmissions... any suggestions or does that throw all the good cams out the door?

grabbem88

jay can/will hook ya up...yeah 420 bones might seem alot,but if you are throwing $$ at it already then why not get the right cam for your set up and emissions

Evil_F

Whats your fuel pressure? Using a stock ECU?... Better (and I do mean better not just bigger) injectors are a plus. But if your car is naturally aspirated, and you have an after market ECU and turn up your fuel pressure. I doubt you can max out your injectors using any stock, or prefabricated intake that I have seen. Other things may be needed (like an ECU or piggy back ECU, & and adjustable FMU), but I would not put injectors in the needed category myself. Though, aftermarket injectors are always a plus.

89GTRed

bump