need your dyno sheets on intake swaps.
#1
need your dyno sheets on intake swaps.
does anyone have before and after dyno sheets on intake swaps? i need my motor to build power higher up on the rpms. its time to give up on the stock motor and swap intakes.
#2
RE: need your dyno sheets on intake swaps.
My old motor:
cold air intake
underdrive pulleys
Longtube headers
2 1/2" full exhaust (211 RWHP/ 276 RWTQ)
Switched to a GT-40 Intake, 70mm Throttle Body and C&L 76mm MAF (257 RWHP/ 302 RWTQ)
Thats a 46 RWHP/ 26 RWTQ gain
cold air intake
underdrive pulleys
Longtube headers
2 1/2" full exhaust (211 RWHP/ 276 RWTQ)
Switched to a GT-40 Intake, 70mm Throttle Body and C&L 76mm MAF (257 RWHP/ 302 RWTQ)
Thats a 46 RWHP/ 26 RWTQ gain
#4
RE: need your dyno sheets on intake swaps.
were peak numbers at same rpm? thats the info i need to know. ineed my car to build power higher up.
right now my peak power on motor is 4800rpms and on nitrous peak power is at a mir 4000rpms. and my 11.51 pass i trapped at 5900-6000rpms[sm=jawdrop.gif]
right now my peak power on motor is 4800rpms and on nitrous peak power is at a mir 4000rpms. and my 11.51 pass i trapped at 5900-6000rpms[sm=jawdrop.gif]
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
daltron
5.0L GT S550 Tech
17
04-28-2016 08:10 PM
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM