Need help getting 300+RWHP...
11-22-2006, 08:46 AM
#13
4th Gear Member
Join Date: Jul 2006
Location:
Posts: 1,207
RE: Need help getting 300+RWHP...
check the holley systemax 2 system, thats whats in mine and im at 347 rear whell horses at 387 ft lbs of torque at 2800 rpm mine came with systemax 2 heads,lower and upper intake,pushrods,roller cam,roller rockers,lifters,valves,valve springs. i bored to a 306 with dss forged pistons and i have 3.73 in the rearend. i run a 12.47 in the quater at 114 mph with a t-5 tranny. but let me warn you!!!!!!!! before u start talking horsepower you better be sure that cars underside can handle it and by this i mean subframe connectors,battle boxes,ect. or you will end up like me with a cracked floor pan and having to replace it with everything. check out the video and listen to the wheel hop off the line due to this and i cant run slicks because of it because i will crack it more. so i have to roll off the line then jam it. keep in mind this is all motor 306 no nos please excuse the rice
burner and my wife and kids fussing in the video. keep in mind s-10 has a 350 in it.
http://www.youtube.com/watch?v=Ceg21BoOTw4 and http://www.youtube.com/watch?v=-z63RwrhIgI
burner and my wife and kids fussing in the video. keep in mind s-10 has a 350 in it.
http://www.youtube.com/watch?v=Ceg21BoOTw4 and http://www.youtube.com/watch?v=-z63RwrhIgI
11-22-2006, 09:25 AM
#14
5th Gear Member
Join Date: May 2005
Location: Central New York
Posts: 3,850
RE: Need help getting 300+RWHP...
Budget build a heads/cam/intake, or save for a few more months and buy a new Trickflow Street Heat package! But if your pinching pennys on your budget buy a nitrous kit...
11-22-2006, 12:03 PM
#16
3rd Gear Member
Join Date: Aug 2006
Location: MO
Posts: 805
RE: Need help getting 300+RWHP...
GT40 kit from ford racing it will get you to about 305 hp, OR the holley kit from summit racing should get you to about 350hp at the crank, The gt40 kit includes 1.6 roller rockers, upper/lower gt40 intake, gt40 heads, and a few other things, the holley kit comes with some heads, upper/lowerintake, a cam, and i timing chain.
11-22-2006, 12:09 PM
#17
6th Gear Member
Join Date: Feb 2006
Location:
Posts: 5,263
RE: Need help getting 300+RWHP...
ORIGINAL: FoMoCo
I'm leaning more to the 3rd choice. How much hp will this engine put out with some good pistons, heads, cam, and a 700cfm carb?
Please help...
I'm leaning more to the 3rd choice. How much hp will this engine put out with some good pistons, heads, cam, and a 700cfm carb?
Please help...
11-22-2006, 12:48 PM
#18
6th Gear Member
Join Date: Jun 2006
Location: Maine
Posts: 5,693
RE: Need help getting 300+RWHP...
ORIGINAL: luckythirteen13
300rwhp with those mods??? how do you figure? you arent even making 300 at the crank. your carb is way to big and ecam isnt much help on any motor let alone a stock one
ORIGINAL: XXC
I got in my car
-ECAM
-Steeda Short Shift
-4:10 Gears
-MSD
-BeCool Radiator System
-Intake
-BBK Shorty Headers
-RPM Airgap Intake
-750 Holley Double Pumper Carb
-302 (.030 Bored) 306
-True Duel, Straight pipes (Flowmaster Exuast)
All I can think of atm, but I'm pushing 300 + RWHP and 300 + RWTQ
When I get my heads put on.. I'll be pushing alot more.
I got in my car
-ECAM
-Steeda Short Shift
-4:10 Gears
-MSD
-BeCool Radiator System
-Intake
-BBK Shorty Headers
-RPM Airgap Intake
-750 Holley Double Pumper Carb
-302 (.030 Bored) 306
-True Duel, Straight pipes (Flowmaster Exuast)
All I can think of atm, but I'm pushing 300 + RWHP and 300 + RWTQ
When I get my heads put on.. I'll be pushing alot more.
300rwhp with those mods??? how do you figure? you arent even making 300 at the crank. your carb is way to big and ecam isnt much help on any motor let alone a stock one
11-22-2006, 03:05 PM
#19
4th Gear Member
Join Date: Apr 2006
Location:
Posts: 1,306
RE: Need help getting 300+RWHP...
+1 I have an SC, intake, headers, exhaust, electric fan, MSD ignition, 30 lb. inj., 73 MM MAF, 70 MM TB/EGR, mass air conversion, custom tune and a bunch of other stuff and I'm at 300 RWHP.
