5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

331 engine installed, clacks under load?

Thread Tools
 
Search this Thread
 
Old 11-26-2006, 11:09 PM
  #1  
95_302_StangMan
3rd Gear Member
Thread Starter
 
95_302_StangMan's Avatar
 
Join Date: Apr 2005
Location:
Posts: 543
Default 331 engine installed, clacks under load?

Hey got my 331 engine in a couple days ago and after timing it to 11* BTDC, I took it out for a little test drive and under a load, say in higher gears like 4th under light acceleration it kinda clacks. My father tells me it is probley because I need higher octane gas. I have a SRP 10-1 compression pistons, I think I need the higher octane gas, what do you guys think. Will 93 octane gas be enough?
95_302_StangMan is offline  
Old 11-26-2006, 11:11 PM
  #2  
nmerrill
5th Gear Member
 
nmerrill's Avatar
 
Join Date: Mar 2006
Location: San Antonio Tx
Posts: 2,271
Default RE: 331 engine installed, clacks under load?

Yea, that sounds like a detonation problem. Try 93 octane, if it still does it you may need to back down the timing to 8* or so
nmerrill is offline  
Old 11-26-2006, 11:12 PM
  #3  
AdderMk2
Banned
 
AdderMk2's Avatar
 
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
Default RE: 331 engine installed, clacks under load?

you should definitly be running 93 octane on 10:1 compression, especially if you bump your timing or havent had the car tuned
AdderMk2 is offline  
Old 11-26-2006, 11:17 PM
  #4  
95_302_StangMan
3rd Gear Member
Thread Starter
 
95_302_StangMan's Avatar
 
Join Date: Apr 2005
Location:
Posts: 543
Default RE: 331 engine installed, clacks under load?

Yea it just does it under a load. I was told that if I backed of the timing it would be worse.
95_302_StangMan is offline  
Old 11-26-2006, 11:18 PM
  #5  
AdderMk2
Banned
 
AdderMk2's Avatar
 
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
Default RE: 331 engine installed, clacks under load?

ORIGINAL: 95_302_StangMan

Yea it just does it under a load. I was told that if I backed of the timing it would be worse.
um no
AdderMk2 is offline  
Old 11-26-2006, 11:22 PM
  #6  
VigCS
5th Gear Member
 
VigCS's Avatar
 
Join Date: Jun 2005
Location: Frederick, Maryland.
Posts: 2,118
Default RE: 331 engine installed, clacks under load?

93 should be enough. I get pinging on 89, 93 got rid of it for me.
VigCS is offline  
Old 11-26-2006, 11:23 PM
  #7  
ddeaton66
3rd Gear Member
 
ddeaton66's Avatar
 
Join Date: Feb 2006
Location:
Posts: 742
Default RE: 331 engine installed, clacks under load?

93 is a must and get that timing down a bit...detonation will destroy an engine in a hurry. Get it to a tuner asap....you may be leaning out..
ddeaton66 is offline  
Old 11-26-2006, 11:23 PM
  #8  
r.barn
6th Gear Member
 
r.barn's Avatar
 
Join Date: Feb 2006
Location:
Posts: 5,263
Default RE: 331 engine installed, clacks under load?

definately gotta run the premium gas with 10:1 compression
r.barn is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
djbigskrilla
2005-2014 Mustangs
24
09-20-2022 01:04 AM
Design1795
Motor Swap Section
1
01-24-2017 10:38 PM
Spiral534
4.6L (1996-2004 Modular) Mustang
6
10-06-2015 04:31 PM
Design1795
New Member Area
6
08-24-2015 04:41 PM
MonsterBilly
Classic Mustangs (Tech)
9
08-12-2015 12:01 PM



Quick Reply: 331 engine installed, clacks under load?



All times are GMT -5. The time now is 06:10 PM.