AFR 165s
what up guys, I haven't posted in a while but I had a question about heads. I am getting set of AFR 165s pretty soon, and I was wondering if everything is going to clear if i have crane 1.7 roller rockers and a E303 cam along with the AFRs.
|
RE: AFR 165s
I've read that that combo will clear but I'd still be careful and check piston to valve clearance when installing.
|
RE: AFR 165s
It's going to be pretty close, definitely clay the pistons to check.
|
RE: AFR 165s
+1 definately always check your clearances.
|
RE: AFR 165s
im about 90 percent sure it will but the stock valvecovers will have to trimmed to fit because more than likely the rockers wont clear, but the guys are right check your clearance
|
RE: AFR 165s
+2 on the clearence
|
RE: AFR 165s
E cam with AFRS......???? Get something a bit better. I know tons of guys use em and make good power, but they really are kindof "outdated"
Look around, unless ofcourse you need to pass emmision, but i donno if AFR's will pas, not sure... |
All times are GMT -5. The time now is 12:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands