ruger311

when you order a Pro-M you have to order it for only the calibration for the exact size of injs you put on b/c they have to calibrate it to those and only those, if you switch you have to order a new one or send it in and have it recalibrated,, there are no sample tube things like the C&L and they are probably the most accurate out of all the MAFs

r.barn

Yep

http://videos.streetfire.net/video/8...0a0177e6d0.htm

bouchermb

So the 95MM Pro M should be good?

I got the 42 lb. inj. the 255 lph pump, and the disk for the FMU, just in case I need it, which I probbaly won't.

ruger311

haha rbarn i saw that one on there before really sucks when that happens

bouchermb

That's all I needed to see.

Watch, I'll end up buying a block by days end.

ruger311

you should! just sucks to have to buy it but it would be better to do it now then have to pull that engine again

88BlueGT

haha....

"Something went uh oh" lmao

2 kwik

a 76- or 80mm maf will work nicely..you may need to clock it though....