Tims 88GT

Anyone ever heard of cometic head gaskets? if so have you used them? how do they work? are they good for forced induction?

thanks tim

samseed101

Anyone who works around performance parts a lot has most likely heard of them. Very expensive gaskets, but great quality. I haven't used them but may buy some for my upcoming H/C/I swap. They are awesome for forced Induction, but like I said, they are pricey.

Ecstasy

im familiar with them, they're expensive like $75 a piece. on the other hand they're virtually unblowable. so if your gonna spend that much on them i hope you have a heavily boosted car, because otherwise you might as well go with regular ones.

AdderMk2

ive talked about these before and everyone was responding like i was a three headed cyclops....

I plan on using a set on my 306

03BottleFedGT

we run them on are 347 blown car. had to use them because we kept blowing out the others. the cost about 80 each. but they have been the best invesment yet. we run 17 psi and they wont blow

Tims 88GT

yea i know but if you have to get heads o-ringed then its not much differance.

Tims 88GT

sweet, well here is the bad news i blew a hg on my gt. my mr gasket ultra seals and bad tune did not hold them, so now i need to pull the heads off and put some new gaskets on and put it back togeather. one thing is the hg has been blown for awhile and i did not know it, it will push water out of the coolant system if you run boost. it has done that ever since i put the blower on, so we will see how it runs on all 8 after i get it put back togeather.

PRO50SC

http://www.atomicspeedware.com/gasket.htm

http://www.4secondsflat.com/Cometic-MLS_Gaskets.html

Tims 88GT

thanks bernie. i am gona get a set from the local machine shop. you know i really can not wate to see what the car runs like after i get it put back togeather.

PRO50SC

No problem yo!! Ummmm, did I miss somethin"? What are you doing to the car.