5.8L from a 93 Truck into an 88 2.3L Mustang.....HELP!
#1
5.8L from a 93 Truck into an 88 2.3L Mustang.....HELP!
Hello everyone...I was sent here in search of the wealth of knowledge of all things Ford....I am looking at how hard it would be to transplant this motor into my 88 keeping the Fuel Injection. I know I will need a Tranni and a rearend and a oil pan and of course I will need motor mounts and most likely a stock 5.0L computer...I have also heard of a distributor gear change???....I would like to go with a Maximum Motorsports suspension w/ their K-Member and I was wondering if there were anybody out there who could point me in the right direction....I am also planning on rebuilding the 351Wbefore I install so no need to worry about that...if anyone can tell me if it is concievable than I would be greatly appreciative...Thanks guys and gals..
FOX351
FOX351
#2
RE: 5.8L from a 93 Truck into an 88 2.3L Mustang.....HELP!
VRIStang went through alot of trouble writing up this page... check it out, Its LOADED with good info
http://www.freewebs.com/vristang/fox351wswapfaq.htm
http://www.freewebs.com/vristang/fox351wswapfaq.htm
#3
RE: 5.8L from a 93 Truck into an 88 2.3L Mustang.....HELP!
there is no reason why you shouldnt do that get that motor build it up and drop that bad boy in there shouldnt be too had just get that k-member in there and you should be fine
#4
RE: 5.8L from a 93 Truck into an 88 2.3L Mustang.....HELP!
u will need 351 headers that fit a fox body
it is very possible and has been done thousands of times successfuly
ive seen people stuff 460's into fox bodies
it is very possible and has been done thousands of times successfuly
ive seen people stuff 460's into fox bodies
Thread
Thread Starter
Forum
Replies
Last Post
BeatnikFink
New Member Area
6
10-01-2015 08:00 PM