what to get with $700
#1
what to get with $700
so i just bought UPR rear u/l control arms and new spark plug wires and cap and rotor. i have $700 left over and am not sure what to buy.
Tell me what you guys think i should do...
1. gt40 or gt40p heads (then save for manifold and cam)
2. valve body and torque converter (my car is an aod and i have a B&M hammer shifter)
3. eibach drag launch springs and shocks/struts
i also bought some MT drag slicks off some guy for $75. they came with the 10 hole rims. they are in good shape.
Tell me what you guys think i should do...
1. gt40 or gt40p heads (then save for manifold and cam)
2. valve body and torque converter (my car is an aod and i have a B&M hammer shifter)
3. eibach drag launch springs and shocks/struts
i also bought some MT drag slicks off some guy for $75. they came with the 10 hole rims. they are in good shape.
#6
RE: what to get with $700
I'd HIGHLY reccomend getting a custom built converter from Edge. You won't lose driveability, it's fun as hell to drive, and you'll drop a good amount off of your e.t. That's going to be 520 bucks with shipping included. Spend the rest on a tranny cooler and save up like 100 more dollars and get your self a different valve body.
#7
RE: what to get with $700
lol juice is good if ya motor aint worn,,and pistons can handle it,and ya know how to time a motor right....other wise get a good set of used rebuilt heads..carefulll,,but there out there///..
#8
RE: what to get with $700
well b4 someone else says it go to a junk yard and get teh gt40p's for about 90-100 then port them out, valve job, and mill em down to 59cc for 690 and that will give u a great performance upgrade