Black95MustangGT

After i get my flowmasters at the end of the month and my 3.73 gears i want to cam her!?

What do i need to do to cam her? Upgrade anything?

musclemustang94

god man, dont bother, waste of money and time.

kartrcr7789

stock cams are good. you would have to get headers, heads, and an intake and MAF for it to amount to anything.

92hatchLX

I would not only do a cam swap but I'd refresh the top end like I did, it's worth a few ponies also. New cam obviously, new springs are a MUST, new lifters, gaskets, timing chain and gears. Don't forget some other small things, assembly lube, tools, RTV (gasket sealant), oil, oil filter, antifreeze, elbow grease etc.

musclemustang94

you dont have to replace roller lifters when you install a new cam

92hatchLX

Thank you captain obvious.

Black95MustangGT

what if i upgrade my heads? i could afford some at the end of the month, some atleast 900 bucks or so. Could those go on? with exhaust cai stage 1 clutch and gears

musclemustang94

call thumper if you want cheap heads

musclemustang94

i was jus sayin, why replace them if you dont need to?

gspfunk

What mods? On stock heads, a cam is not worth it. Spend your $ somewhere else... MAF, TB, Full exhaust, etc. will give you more power if you haven't done those mods yet.