351 Clevland
12-19-2006, 10:57 AM
#1
3rd Gear Member
Thread Starter
Join Date: Oct 2006
Location: NY
Posts: 816
351 Clevland
i have a 351 within reach for free for a while as long as i buy the conversion kits and everything for my 89 5.0, i was wondering what kinda horsepower this engine is putting out with just the basics, and what pirce am i looking at for the kits
12-19-2006, 09:05 PM
#5
Yukon Cornelius
Join Date: Oct 2005
Location: deep in the heart of dixie GEORGIA
Posts: 11,808
RE: 351 Clevland
theres not really a need for an aftermarket for a cleveland they make huge power with stock heads and an aftermarket cam,intake,carb,headers
but they do make parts for them edelbrock makes heads along with afd, chi, blocks are plentiful, as are cams and after market intakes like the parker funnel web,edelbrock etc
www.ausfordparts.com www.chi.com
but they do make parts for them edelbrock makes heads along with afd, chi, blocks are plentiful, as are cams and after market intakes like the parker funnel web,edelbrock etc
www.ausfordparts.com www.chi.com
12-19-2006, 09:08 PM
#6
5th Gear Member
Join Date: Oct 2006
Location: west chester
Posts: 3,305
RE: 351 Clevland
finally someone said it right, u dont need a lot of aftermarket **** with these motors to make them nasty just get a big ol cam and nice intake and headers and u got 500 crank hp
ORIGINAL: rmodel65
theres not really a need for an aftermarket for a cleveland they make huge power with stock heads and an aftermarket cam,intake,carb,headers
but they do make parts for them edelbrock makes heads along with afd, chi, blocks are plentiful, as are cams and after market intakes like the parker funnel web,edelbrock etc
www.ausfordparts.com www.chi.com
theres not really a need for an aftermarket for a cleveland they make huge power with stock heads and an aftermarket cam,intake,carb,headers
but they do make parts for them edelbrock makes heads along with afd, chi, blocks are plentiful, as are cams and after market intakes like the parker funnel web,edelbrock etc
www.ausfordparts.com www.chi.com
12-20-2006, 04:15 AM
#10
2nd Gear Member
Join Date: Dec 2006
Location: Clovis, CA
Posts: 221
RE: 351 Clevland
If you take a stock 1970 351C 2V head and put it up to one of those fancy Edelbrock heads, the 2V head will out flow it every time. The 351C 2V and 4V both have canted valves too; just like a BB Chevy.