bobbyward

looking for a nice clear picture of some wiring on the right inner fender in front of the tower
also one of the area in front of the left tower, doing a major rebuild and nothing was right and
would like to see a stone stock one for details, thanks for your time
bobby
please send to
nyap2001@yahoo.com

Scout2232

I would try a shop manual or something.

mattdel

i can give you wiring diagrams if you need.

bobbyward

thanks but i would like pictures more
i have a chilton that i might have to resort to
stripped this to the bone and had so many pieces missing just wanted photos of what it should look like from the factory and where and how they are mounted
what a mess

bobbyward

thanks
i have one but i need real pictures for good detail
i tore my car into a thousand pcs plus the thousand that was missing .....................

motorman524

not tryin to be a ***** but whyd you do that if you didnt know what you were doin?

goathead75

I've got a pretty much stock 93, the only changes wiring wise is that the car had an alarm (I've stripped most of it out) and the guy wired aftermarket fog lights to it. If you still need a pic I can probably fire one up tonight if you want. Just to clarify you're referring to right=driver's sideleft=passenger side?

88BlueGT

I have about a dozen pictures of each side from when I did my wire hidding but they are on a friends camera and he never sent me the pics. Let me know if you still really need them and I can see for you.

bobbyward

well i do know what i'm doing, the point is the idiots that had it before me mainly had almost all parts wired on and i'm just about 100% sure ford didn't not install parts with wire ? i'm attempting to make it look 100% factory and do so i need pictures of where and how the wires ran , i took off every single part under the hood and including suspension and all, now i'm putting it back to look like a bunch of idiots haven't been working on it , i don't like that look as i'm very picky about stuff like that, i feel if ford puts 2 bolts in a bracket it should not have one wrong size bolt and one wired on the other side , and not to be a smart *** i have owned and worked on a mustang or mustangs for over 35 years which is longer then most mustang owners are old .......................not to tell off my age

bobbyward

yeah, that would be great, mainly need to check mounting locations
there are several holes that are close but i don't seem to like were each piece seems to fit , please email pic to
nyap2001@yahoo.com
thanks bobby