dj1203

i am trying to fit a 98 seat in a 94 car, the connections for the electric are different. on the new seats there are four electrical inputs but only two outputs on the car itself. anyone have any experience with this?

mattdel

colors? i'll tell you what they are

AdderMk2

they shouldnt be different at all.. its the same harness.. i think your grabbing the wrong wires there bub!

mattdel

Yellow/White wire moves the seat backwards, Red/White moves it forward.
Red/Light brown moves it down, Yellow/Light Brown moves it up

dj1203

the colors are big guage black, big gauge green, small gauge green and small gauge brown with a green stripe

dj1203

it might have come from a later year but these are the four wires that went from the floor into the seat

mattdel

is that the seat wiring or the car wiring?

dj1203

its the car wiring that goes into the seat

wythors

99 and up cars have four wires. 98 and back have two. I'll try to dig up a picture of the "adjustment" a little later tonight.

dj1203

is it possible that the smaller two are for the belt detector? if so i am not using the belt on the seat and it would not be needed