Pulling Rear
#12
RE: Pulling Rear
the park brake cables are the cables that attach to the back of each drum right?.. if so all you have to do is take the drum cover off and then kinda pull the cable with pliers until its loose then it should come out the back of the drum.. its not hard..
oh my bad i didnt read that you had the rear end out ...haha..
oh my bad i didnt read that you had the rear end out ...haha..
#13
RE: Pulling Rear
now would be a good time to reinforce those torque boxes
just curious, will the 8.8 stock, with Moser Axles, Slicks,4:10;s and HD Driveshaft, Handle 450rwhp? Or am I gonna still snap something?
Im starting my Blower Project Soon maybey a waterbox or methanol, with a Diesel Intercooler AT 10+ PSI to compensate for the loss of Psi through the Huge Intercooler and Piping
Im also getting rear disc, slotted rotors, 5 lug conversion,stainless steel brake line and such, along with better shocks etc to help me plant all this to the pavement
just curious, will the 8.8 stock, with Moser Axles, Slicks,4:10;s and HD Driveshaft, Handle 450rwhp? Or am I gonna still snap something?
Im starting my Blower Project Soon maybey a waterbox or methanol, with a Diesel Intercooler AT 10+ PSI to compensate for the loss of Psi through the Huge Intercooler and Piping
Im also getting rear disc, slotted rotors, 5 lug conversion,stainless steel brake line and such, along with better shocks etc to help me plant all this to the pavement
#14
RE: Pulling Rear
ORIGINAL: aode06
now would be a good time to reinforce those torque boxes
just curious, will the 8.8 stock, with Moser Axles, Slicks,4:10;s and HD Driveshaft, Handle 450rwhp? Or am I gonna still snap something?
Im starting my Blower Project Soon maybey a waterbox or methanol, with a Diesel Intercooler AT 10+ PSI to compensate for the loss of Psi through the Huge Intercooler and Piping
Im also getting rear disc, slotted rotors, 5 lug conversion,stainless steel brake line and such, along with better shocks etc to help me plant all this to the pavement
now would be a good time to reinforce those torque boxes
just curious, will the 8.8 stock, with Moser Axles, Slicks,4:10;s and HD Driveshaft, Handle 450rwhp? Or am I gonna still snap something?
Im starting my Blower Project Soon maybey a waterbox or methanol, with a Diesel Intercooler AT 10+ PSI to compensate for the loss of Psi through the Huge Intercooler and Piping
Im also getting rear disc, slotted rotors, 5 lug conversion,stainless steel brake line and such, along with better shocks etc to help me plant all this to the pavement
#15
RE: Pulling Rear
ok, 31 spline Truck Posi Trac with Extra Carbon Fiber Clutches and forged axles on thier way[8D], glad I heard before hand!
After watching that dude snap his axles on the track , that wasnt pretty
After watching that dude snap his axles on the track , that wasnt pretty
Thread
Thread Starter
Forum
Replies
Last Post
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM
Dragonus18
4.6L (1996-2004 Modular) Mustang
8
09-09-2015 01:21 AM
tj@steeda
Steeda Autosports
0
09-08-2015 11:50 AM
tj@steeda
Steeda Autosports
0
09-01-2015 08:16 PM