When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
well i know there like e6 heads on the 86 and just about any real good aftermarket hed wont work cuz the valves will hit the piston. i dont see how it would be better since they had a smaller hp rating, but im sure sumone will enlighten us
^lol thats some funny **** right there... ****in, and sbf heads are hard to find in a junkyard[:@]. i tried to get a set of gt40s cuz my dad ****ed one of mine up(long story), but no dice w. in a 2 hour drive. it was hard enough to find e7 heads.
Yeah... 86 heads really suck... you can put trickflow twisted wedge heads on a 86 short block without piston to valve clearence problems. but you need to use the stock cam and 1.6 ratio roller rockers.