Lisaac

Can someone please help me. I have just rebuilt a 351w that was running fine prior to rebuild. it then hadstock dish pistons, 0.030 crankshaft, manley push rods, the headshave the gt-40 valvetrain in them with 1.7 adjustableroller rockers. The only difference now is that the engine was bored 0.40 over with Keith Black pistons.

Now when i try to crank it, it just spin and won't crank. it's getting good fire and compression. but there is white smoke blowing out of the cold air intake for some reason. this is my first high performance rebuild. can someone please?

EliteTuners

So it turns over and all but you just get white smoke?

EliteTuners

Sounds like oil is over-filled.

LesteR723

did you overtighten your pistons down on the crank? and yeah white smoke is usually oil overflow. Did you make sure your rings are in the right place and facing the right way?

Cleeman99

lol white smoke thro the intake i just took e four-wheeler in for white smoke on rebuilt motor and something went wrong and screewed the piston wall over. lol and i had white sm00e coming outa the cai yeah i had a hiperformance fourwheeler and i it for a day and it was fuked and now its 800 fora new block **** i can buy a 302 assmeled on ebay dor that lol v8 in a 300lb fourwheeler lol

P Zero

Soounds like the firing order is off. Or the disty is 180* off.
-P.

Lisaac

I changed the Dist. 180. still the same. Also, as i backed off the screws on the rockers it spent over like it trying to crank more, but just won't crank. This is the first time i have ever encountered this problem. I also chcked the Oillevel and it's fine.

Lisaac

Can someonee please help with this?????

Lisaac

Can anyone help me out with this?

Lisaac

TTT